3.
Ensure the stand is horizontal by adjusting the height of
the feet.
Use a spirit level to ensure the unit is horizontal in all di‐
rections.
The absolute tilt of the appliance in operation must not ex‐
ceed 2° (3.4%).
4.
Stick the necessary warning signs in the specified posi‐
tions. Make sure that the surface is clean of oil and grease
before sticking the warning sign in place.
Additional information:
you can find the warning sign stickers inside the oven.
Type and position of the warning sign stickers to be attached
The following warning signs must be attached to the combi steamer in the specified positions:
Warning sign Position on the combi steamer
Somewhere on the left side of the appliance door in area 2 (see
'Warning signs on
the combi steamer' on page 24) depending on the installation situation.
Directly above the door handle if
the top of the appliance lies above 1.20 m
personnel are mainly semi-skilled staff (recommended).
Right at the top of the appliance door if
the top of the appliance does not lie above 1.20 m
On the left side of the appliance door in area 2 (see
'Warning signs on the combi
steamer' on page 24) at a height of 1.60 m above the kitchen floor.
5 Setting up the appliance
Installation manual
64