31
5.3
Start the AED7000 Plus Automatic External
Defibrillator
The operator should first start the AED7000 Plus to check its
working condition and power condition.
5.3.1
Checking power condition
Pressing the ON/OFF button for 2~3seconds to start the AED7000
Plus, the power indicator will turn on. If the indicator is flickering,
it means that the AED7000 Plus is in the status of low power, and
the current battery should be replaced.
5.3.2
Check the working condition
After the AED7000 Plus starts, the AED7000 Plus will begin to
check the condition of the pads connection.
Before the pads are properly connected, the AED7000 Plus will
prompt the operator to insert the connector of the pads to the
socket of the AED7000 Plus and place the pads correctly on the
patient.
Check the electrodes.
Note
If the pads are improperly connected, LCD will display :
Check Pad.
No voice prompt or LCD display following the start of the
AED7000 Plus, indicates an internal error of the AED7000 Plus
