Ref.: WB-VL-65 DSP LX Premium - OM Ver.1.6 (B2927)
32
9. OPTIONS
Program related options can be accessed by using the Navigation keys to select
button in
the
WELCOME
screen followed by pressing
key. System will prompt to enter the
Password. Use
keys as password. Following
OPTIONS
screen will be displayed:
Fig. 31
9.1.
WEIGHT CALIBRATION
W
h
W
h
When calibration has to be done?
If balancing requires more than one balancing run or repeated weights for smaller
wheels.
If the Balancer is shifted from one place to other.
If foundation is affected.
If MCD shaft is disturbed.
If abnormal weights are displayed.
If Inner & Outer unbalance weights for empty shaft Wheel run are not zero.
Pre-calibration check
1.
Ensure the foundation is proper.
2.
Ensure the Cabinet is free from shake.
3.
Check the Belt tension and RPM. The RPM should be 175 (+20/-5).
Pre calibration (Applicable for Factory & Authorized Engineer)
Following sub options will be provided in
WEIGHT CALIBRATION
screen as
shown below:
Once selected, following sub options will be provided in
WEIGHT
CALIBRATION
screen as shown below:
Fig. 32
Low Point & High point calibration is password protected
Password:
This feature should be used only by authorised Service personnel
Balancing operation should be carried out only after performing 2 Point
calibration
Now press
key to toggle the keypad
control from Task bar to the options available
in
OPTIONS
screen.
Use navigation keys to select the required
options & press
key to perform the
program related options.
Press
key to go back to previous screen
or select
button and press
key to exit
from
OPTIONS
screen.
