Ref.: WB-VL-65 DSP LX Premium - OM Ver.1.6 (B2927)
31
8. SETTINGS
Program related settings can be accessed by using the Navigation keys to select
button in
the
WELCOME
screen followed by pressing
key. Following
SETTINGS
screen will be
displayed:
Fig. 30
Now press
key to toggle the keypad control from Task bar to the following options available
in
SETTINGS
screen:
Display of Unbalance weight in “Gram” or “Ounce” unit
Display of Rim parameters in “Inch” or “mm” unit
Balancing in “Static” or “Dynamic” mode
Display of Unbalance weight in “Fine” or “Normal” mode
Enabling or Disabling Buzzer indication throughout balancing program & Settings
Enabling or Disabling Auto run function in Wheel balancing operation
Enabling or Disabling Automatic Distance measurement
Enabling or Disabling Automatic Diameter measurement
Enabling or Disabling Automatic Width measurement
Enabling or Disabling Laser function
Enabling or Disabling Torch function
Enabling or Disabling battery status indication of Mini UPS
Use navigation keys to select the required settings & press
key to enable / disable the
same.
Press
key to go back to previous screen.
If Automatic Distance measurement is disabled, Automatic Diameter & Width settings
will be disabled also. To enable Automatic Diameter & Width, Automatic Distance
settings should be enabled first
