Ref.: WB-VL-65 DSP LX Premium - OM Ver.1.6 (B2927)
28
7.5.
SPECIAL FUNCTIONS
7.5.1.
SPLIT WEIGHTS (SPOKES / HIDDEN WEIGHT) FUNCTION
Split weights function supports ALU2 & ALU3 only
Split weights function is advisable only for Alloy wheels with Outer
unbalance weight 20 gm
In case of Alloy wheels, Split weights function can be used to split the
balancing weight on Outer plane (Inner most plane) only to hide the
weights behind the Spokes
Ensure that the Balancing mode is in
Dynamic
mode.
Enter the Rim parameters, select Rim type & balance the wheel as explained
in Chapter 7.4.2. Once the unbalance weight is displayed, select
button
(Split weight function) and press
key. Following screen will be displayed:
Fig. 26
No. of spokes that can be accommodated is min. of 3 spokes & max.
of 12 spokes
Select the appropriate Nos. of Spokes with respect to the number of spokes
available in the Wheel being mounted using Navigation keys and then press
key. Following screen will be displayed:
Fig. 27
System will prompt to bring the nearest spoke of the unbalance position and
then press
key.
In case of Sticker weight holder, bring the nearest spoke to 12 o‟
clock (Top) position and press
key.
In c
ase of Laser mode, bring the nearest spoke to 6 o‟ clock (Bottom)
position and press
key.
Use
key to go back to previous screen
If the weight adding position is shown in that spoke itself, Split
weights function cannot be performed
If the Spoke is not brought near the unbalance position correctly,
“
Spokes are too far
“ message will be displayed