Ref.: WB-VL-65 DSP LX Premium - OM Ver.1.6 (B2927)
29
The system will go to
SPLIT WEIGHTS
screen as shown below:
Fig. 28
The Spoke-1 & Spoke-2 positions will be indicated in Green & Pink color balls
respectively on the outer plane. Inner weight will be same. Rotate the wheel
slowly & bring any one of the balls (Green/Pink) on outer plane nearer to the
top until the
symbol is displayed. Now stop the wheel. Corresponding
weights will be indicated on the window as shown above. Now paste the
indicated weight (Sticker type) at the indicated position on to the rim, behind
the spoke.
Now bring the other ball nearer to the bottom until the
symbol is displayed.
Now stop the wheel. Corresponding weights will be indicated on the window.
Now paste the indicated weight (Sticker type) at the indicated position on to
the rim, behind the spoke. Also add the weights for Inner plane similarly.
Press
key to go to
WHEEL RUN
screen (Fig.23) to balance the wheel as
explained in Chapter 7.4.2 or press
key to exit from Split weights program
& to go to
WHEEL RUN
screen.
7.5.2.
OPTIMIZATION FUNCTION
Optimization is normally done to reduce the Static unbalance of wheel. By
compensating (when possible) the static unbalance of Tyre with that of Rim
ie., by bringing the static unbalance of Tyre & Rim to 180° opposite. But in the
program, bringing unbalance positions of Tyre & Rim to 180° opposite is done
by the software automatically when the marks on Tyre and Rim is matched.
The system will enter into Optimization function only if the unbalance
is >75 gm
Balancing weights are to be removed if any, from the wheel and mount the
wheel by matching the wheel mouth with the Arrow mark on the Shaft (User
can also mark the location in shaft where the Wheel mouth matches in case if
Arrow sticker is not found in shaft)
Enter the Rim parameters, select the Rim type & balance the wheel as
explained in Chapter 7.4.2.
Optimization function can be applied for large weight on both planes of the
wheel. Once the unbalance weight is displayed, select
button
(Optimization function) and press
key.
