Ref.: WB-VL-65 DSP LX Premium - OM Ver.1.6 (B2927)
20
Fig. 14
7.3.3.
LCV WHEEL MOUNTING
LCV wheel mounting is same as Front cone mounting type except that the rim
has offset centres extended around the backing plate.
Mount the Plastic spacer onto the shaft butting its solid face against the
MCD face as shown in Fig.15.
Select the appropriate Wheel seating cone depending upon the centre
hole diameter of rim.
Lift the wheel on to the shaft and slide it to butt against the Spacer.
Position the cone onto the centre hole diameter of the rim and insert it to
the shaft along with the wheel.
Insert the QCLN with the Pressure ring after removing the Hub on to the
shaft and tighten it securely against the cone.
Fig. 15
MCD
SHAFT
WHEEL
SEATING
CONE
WHEEL
PRESSURE
RING
QCLN
RELEASE
LEVER
Ø52.5
-70mm
Ø66-
83.5mm
Ø80-
97.5mm
Ø94-
111.5mm
Ø113.2-
125.9mm
WHEEL
MCD
SHAFT
SPACER FOR
LCV WHEELS
(If required)
LCV WHEEL
SEATING
CONE
LCV Shaft
Tata 407
Canter
PRESSURE
RING
QCLN
RELEASE
LEVER
Swaraj
Mazda
Canter Toyota Tata
407
