MAM SQ16 Owner'S Manual Download Page 90 | Manualshive

Page: 90 / 106

background image

90

12. Rotate

SQ16

• Mode d:

This mode is used to create random rhythms. After a certain number of steps (Delay) the Step Play Position is incre-
mented by a certain number of steps (Shift):

• Start: Step Play Position = Step 1 if Delay>1

Step Play Position = Step(1+<Shift>), if Delay=1

• Step Shift: Immediately after Start: After (<Delay-1>) Steps incrementing the Step Play Position by (<1+Shift>) Steps

Otherwise: After <Delay> Steps incrementing the Step Play Position by (<1+Shift>) Steps

The Step Play Position can never exceed the Pattern Length. As an example, if the Pattern Length is 8 and the cur-
rent Step Play Position is Step 6 a Step Shift of 5 Steps results in a new Step Play Position of 3.

• no Step Shift (Shift=0): The Step Play Position is incremented by 1 with each Step. If the Step Play Position is the

final Pattern Step (for example 8 with a Pattern Length of 8) a Reset to Step 1 is performed.

• the Reset value has no significance here

Examples: Pattern Length 8

Example 1:

Since the Delay setting is larger than 1 the Step Play Position after starting is 1. The first Step Shift happens after
(<Delay>-1); after two Steps at Step Play Position 2. The new Step Play Position then is 2 + (1+<Shift>) Steps = Step 5.
The Step Play Position is incremented as usual until after <Delay> Steps (3 Steps) a new Step Shift takes place at Step
Play Position 7. In theory the Step Play Position would again be incremented by 3; this would result in Step Play Position
10. However since the Pattern Length is only 8 the new Step Play Position is (Step Play Position - Pattern Length = 10 -
8 = 2). Now the Step Play Position is incremented us usual until after three Steps (at Step Play Position 4) the next Step
Shift takes place.

After 14 Steps (at Step 15) we have the same situation from which we started in the beginning; this means that this track
repeats itself every 14 Steps. If Rotate is only active for Instrument I4 the rhythm for all other tracks repeats itself every
8 steps (Pattern Length) while the rhythm for I4 repeats itself every 14 steps. If you make different Rotate settings for
other tracks you can get a very complex result which at times may have random character.

«
...
88
89
90
91
92
...
»

Summary of Contents for SQ16











































































































Reviews:

No comments

Related manuals for SQ16

Brand: Eagle Pages: 3

Brand: Abicor Binzel Pages: 92

Brand: Tabi Pages: 8

Brand: Dabi Atlante Pages: 102

BODY ARMOR PRO TERM

Brand: Darco Pages: 6

Brand: Fellowes Pages: 20

Brand: Mach Pages: 12

Brand: UNI-T Pages: 4

UPO3000E Series

Brand: UNI-T Pages: 94

Brand: UMS Pages: 92

Brand: Yamaha Pages: 48

Brand: Zennio Pages: 3

Brand: ZOLL Pages: 48

Brand: Ebyte Pages: 7

Brand: Strapack Pages: 16

Brand: Hameg Pages: 60

Chandler Engineering 1910

Brand: Ametek Pages: 46

Brand: ORORO Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands