manualshive.com logo in svg

MAM SQ16, Owner'S Manual

Share
Download
MAM SQ16 Owner'S Manual Download Page 9

9

1. Introduction

SQ16

1.5. First steps

This section helps you to become familiar with the basic operation of the SQ16. If you have never before worked with an
SQ16 you should follow these steps carefully.

1. Making connections

1.1. Connect the SQ16 to a MIDI expander that offers both drum instruments (as drumsets) and other sounds. Connect

the SQ16's MIDI Out to the expander's MIDI In.

1.2. Connect the included power supply to the SQ16.

2. Turning on the SQ16

• On powerup Block 1 data is loaded into the Edit Buffer. The SQ16 is in Play Mode - Pattern with Pattern 1 selected.

The tempo is set to 120 bpm.

• The 13 instrument tracks of Pattern 1 are set to send on MIDI channel 10 and are configured for a General MIDI

drumset.

• The 3 note tracks of Pattern 1 are set to the following MIDI channels:

note track n14: Channel 1
note track n15: Channel 2
note track n16: Channel 3

3. Starting the sequencer

Press the "Loop" button and start the SQ16 by pressing the "Start/Stop" button. You should hear a drum sequence with
all 13 instrument tracks activated and all note tracks muted.

If the connected expander isn't playing at all check for:

• Wrong connections

• Incorrect MIDI setup in the expander (for example disabled MIDI In)

• The expander possibly doesn't have any drumkits or they are not set to receive on channel 10

If the instrumentation is not musically useful the expander probably uses a drum mapping different from the General
MIDI standard. In this case you will have to change the instrument assignments in the SQ16 (see section 10).

4. Selecting a pattern for playback

4.1. Press step buttons 1...16 to play different patterns. The currently playing pattern is displayed in the right readout,

the next selected pattern in the left readout.

4.2. Before continuing with the next step select Pattern 1.

5. Activating and muting instrument tracks

5.1. Press the "Inst/Note" button. Mute setting Co001 is selected; all 13 instrument tracks are activated; all three note

tracks are muted.

5.2. Press the "arrow up" button in the left Select/Edit section several times to select different Mute settings.

5.3. Press the "arrow down" button in the left Select/Edit section until again Mute setting Co001 is active.

5.4. Press step button 1.13 to mute a single instrument track or mute all tracks with the "ALL OFF" button. You can turn

back on a muted track by again pressing its corresponding step button. Use step button 14...16 to mute the note
tracks n14, n15 and n16.

Summary of Contents for SQ16











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands