manualshive.com logo in svg

MAM SQ16, Owner'S Manual

Share
Download
MAM SQ16 Owner'S Manual Download Page 65

65

8. Mute settings

SQ16

8. Mute settings

Each Block in the SQ16 contains 16 different settings for individual mutes affecting instrument tracks and note tracks. Those
Mute settings allow especially in a live setting fast switching between mutes for instrument tracks and note tracks. As an
example, if you want to play alternating just the instrument tracks and then just the note tracks you create one Mute setting
that has all note tracks muted and a second setting that has all instrument tracks muted. If you toggle between those two set-
tings you hear either just the instrument tracks or just the note tracks. There are different kinds of Mute settings:

• 1...14: Co 001...Co 014

Various Mute settings for Play Mode - Pattern or Play Mode - Chain. All instrument tracks and note tracks can be muted
individually.

• 15: SNG

A single Mute setting in which also all instrument tracks and note tracks can be muted individually. This setting becomes
automatically active if you switch to Play Mode - Song. However this setting can also be used in Play Mode - Pattern
and Play Mode - Chain.

• 16: SGL

SGL can only be activated in Play Mode - Pattern and Play Mode - Chain; not in Play Mode - Song. When this setting is
active just one single track can be heard, all other tracks are muted. If you edit specific data in the instrument tracks or
note tracks just the edited track becomes audible, all other tracks are muted. As an example, you have selected Inst/
Step On/Off: If you start to edit instrument 4 you will also hear just instrument 4. If you them switch to instrument 1 you
will again hear just instrument 1.

This automatic Mute switching works for the following functions:

• Inst/Step: all subfunctions

• Note/Step: all subfunctions

• Rotate: Delay, Shift, and Reset

• Step Set Edit: all subfunctions

• MIDI Set Edit: I Note #, I Channel, n Receive Channel, n Send Channel

Editing Mute settings:

1. Activate "Inst/Note - On/Off".

2. Select the Mute setting you want to edit: During Play Mode - Song you can only edit setting "SNG", during Play Mode -

Pattern each of the 16 settings.

a. Using the "arrow" buttons in the left Select/Edit section.

b. Keep pressed the "Select" button in the left Select/Edit section and press one of the step buttons to select the desired

Mute setting. Step buttons 1...14 equal mute settings Co 001...Co014; step button 15 equals "SNG" and step button
16 equals "SGL". Release "Select" button.

3. Editing the Mute settings: The LED's above the step buttons indicate which tracks are audible (LED on) and which are

muted (LED off).

a. For Mute settings Co 001...14 and "SnG" press single step buttons to mute or unmute a track. The Mute setting "SGL"

cannot be edited.

b. Press ALL OFF button to mute all tracks (not available for "SGL")

c. Press ALL ON button to unmute all tracks (not available for "SGL")

Example: For Mute setting C 001 unmuting all instrument tracks, muting all note tracks

Summary of Contents for SQ16











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands