MAM SQ16 Owner'S Manual Download Page 105

Page: 105 / 106

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using the SQ16

Do not use the SQ16 near water - for example near a bathtub, washbowl, kitchen sink, in a wet basement, on
a wet bar, or near or in a swimming pool.

The SQ16 should be situated so that its location or position does not interfere with its proper ventilation.

The SQ16 should be located away from heat sources such as radiators, heat registers, fireplaces, stoves, or
ovens.

The SQ16 should only be connected to a power supply of the type described in the operating instructions and
as marked on the product.

The power supply of the SQ16 should be unplugged from the outlet when left unused for a long period of time.

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure of the SQ16
through openings.

The product should be serviced by qualified service personnel when:

- the power supply cord has been damaged; or

- Objects have fallen, or liquid has been spilled into the product; or

- the product has been exposed to rain; or

- the product does not appear to operate normally or exhibits a marked

- change in performance; or

- the product has been dropped or the enclosure damaged.

All servicing should be referred to qualified service personnel.

Summary of Contents for SQ16











































































































Search results

Summary of Contents for SQ16

Reviews:

Brands by name

Popular brands

MAM SQ16, Owner'S Manual

Search results

Summary of Contents for SQ16

Reviews:

Brands by name

Popular brands