manualshive.com logo in svg

MAM SQ16, Owner'S Manual

Share
Download
MAM SQ16 Owner'S Manual Download Page 23

23

3. Global

SQ16

Examples:

3.5.2. Loading/Writing Patterns.

You can load/write a single pattern, several patterns within a pattern group or all patterns (1...64) within a block.

1. Activate "Global".

2. Press "Load From Block" or "Write To Block" until the LED for Patterns in the right Select section lights up.

3. Select the Block you want to load from or you want to write into with the up/down buttons (step buttons 11 and 12); the

left display shows the appropriate Block 1...8.

4. Choose which Pattern(s) you want to load/write. Keep the "Select" button in the right Select/Edit section pressed and

make the following selections:

4.1.Loading/Writing all Patterns: Press "ALL ON" button until all Pattern groups are selected (all LED's above the Pat-

tern group buttons light up).

4.2.Loading/Writing Patterns within a Pattern group: Select the desired Pattern group with the appropriate Pattern group

button (no Patterns are loaded from/written into the unselected Pattern groups).

a. Press step buttons 1...16 shortly to select several Patterns. Step buttons 1 to 16 equal Patterns 1 to 16 if Pattern

Group 1-16 is selected; Patterns 17 to 32 if Pattern group 17-32 is selected, Patterns 33 to 48 if Pattern group 33-
48 is selected and Patterns 49 to 64 if Pattern group 49-64 is selected.

b. Press a single step button for at least a second to select a single Pattern.

c. Press the "ALL OFF" button to select the first pattern in the selected Pattern group.

d. Press the "ALL ON" button to select all Patterns within the selected Pattern group.

e. Selecting all 64 Patterns: Press "ALL ON" button until all Pattern groups are selected (all LED's above the Pattern

group buttons light up).

5. Press "Enter" (step button 14). If the left display reads "YES" press

a. again "Enter" to load/write.

b. "Exit" (step button 13) to abort and to leave "Global".

6. After loading/writing press "Exit" (step button 13) to leave "Global" or repeat step 2 to 5 to load/write other Patterns.

Summary of Contents for SQ16











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands