manualshive.com logo in svg

MAM SQ16, Owner'S Manual

Share
Download
MAM SQ16 Owner'S Manual Download Page 97

97

12. Rotate

SQ16

Editing Delay, Shift, Reset and Mode settings:

1. Activate either

• "Rotate - Delay" to change the Delay and Mode settings

• "Rotate - Shift" to change the Shift setting

• "Rotate - Reset" to change the Reset setting

2. Select one of the 16 Rotate settings:

a. using the "arrow" buttons in the right Select/Edit section (Rotate number is shown in the right display)

b. Keep pressed the "Select" button in the right Select/Edit section and press Step button 1...16 to select the desired

Rotate setting (Rotate number is shown in the right display)

3. Select the instrument track I1...I13 or the note track n14...n16 which settings you want to edit

a. using the "arrow" buttons in the left Select/Edit section

b. Keep pressed the "Select" button in the left Select/Edit section and press Step button 1...16 to select the desired track

4. Change the settings for Delay, Reset and Shift using either the Up/Down buttons (step buttons 11, 12) or use step but-

tons 1-9, 0 to input value:

• Delay: 1...64

• Shift: 0...15

• Reset: 1...255

5. Selecting the Mode

5.1.Press Rotate Delay

5.2.Press the Enter button (step button 14) to select the desired mode. The mode is shown in the right display together

with the Delay setting.

12.5.2. On/Off

You can activate the Rotate function separately for each track; this is also stored with the Rotate setting.

1. Activate "Rotate - On/Off".

2. Select one of the 16 Rotate settings:

a. using the "arrow" buttons in the right Select/Edit section (Rotate number is shown in the right display)

b. Keep pressed the "Select" button in the right Select/Edit section and press Step button 1...16 to select the desired

Rotate setting (Rotate number is shown in the right display)

3. Use step buttons 1-13 to turn on/off Rotate for instrument tracks and step buttons 14-16to turn on/off Rotate for note

tracks.:

Example: On/Off for Rotate setting 1

Rotate is only active for instrument tracks I1 and I2 and note track n14. If you activate the Rotate setting during Play
Mode - Pattern or Play Mode - Chain only I1, I2 and n14 are affected by the Delay, Shift, Reset and Mode settings made
for each track in Rotate setting 1. All other tracks are played in normal fashion. If Play Mode - Song is active the Rotate
function becomes active for each Song step the uses Rotate setting 1 as active Rotate setting; even here only I1, I2 and
n14 are affected.

Summary of Contents for SQ16











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands