manualshive.com logo in svg

MAM SQ16, Owner'S Manual

Share
Download
MAM SQ16 Owner'S Manual Download Page 83

83

11. Recording note tracks

SQ16

• Mode Arp Up2

The notes are sorted from the lowest to the highest note, then a copy of the notes is transposed up by one octave and
appended. Then the resulting notes are assigned one after another to steps.

• Mode Arp do1

The notes are sorted from the highest to the lowest note and assigned one after another to steps.

• Mode Arp do2

The notes are sorted from the highest to the lowest note, then a copy of the notes is transposed down by one octave
and appended. Then the resulting notes are assigned one after another to steps.

• Mode Arp Ud1

The notes are sorted from the lowest to the highest note, then a copy of the notes is appended in reverse direction.
Then the resulting notes are assigned one after another to steps.

• Mode Arp Ud2

The notes are sorted from the lowest to the highest note, then a copy of the notes is transposed up by one octave and
appended; the resulting notes are copied appended in reverse direction. Then the resulting notes are assigned one after
another to steps.

Summary of Contents for SQ16











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands