manualshive.com logo in svg

MAM SQ16, Owner'S Manual

Share
Download
MAM SQ16 Owner'S Manual Download Page 20

20

3. Global

SQ16

3. Edit with the up/down buttons (step buttons 11 and 12) the setting. Example: Pattern length - if the right display reads "-

--" Common Pattern is not active; the Patterns use their individual settings. If the display reads 001...016 Common Pat-
tern is active and all Patterns use the displayed Pattern Length. The following settings are possible:

• Length:001...016 (Common Pattern active) or "---" (Common Pattern not active)

• Scale:1, 2, 4, 8, 16, 32 (Common Pattern active) or "---" (Common Pattern not active)

• Step Set:001...016 (Common Pattern active) or "---" (Common Pattern not active)

• MIDI Set:001...016 (Common Pattern active) or "---" (Common Pattern not active)

4. Repeat step 2 and 3 to change other Common Pattern settings or press "Exit" (step button 13) to leave Global.

Example:

• patterns use individual length settings.

• All patterns use Scale value 16.

• All patterns use Step Set 1 and MIDI Set 2.

3.4. Clock Source, Clock out On/Off, Autostart On/Off

Those settings control the MIDI-synchronization to other sequencers/drum computers and are common to patterns, chains
and Songs.

• Clock Source - Autostart On/Off

Clock Source IC: The SQ16 always uses its internal clock regardless if it is started internally (via Start/Stop/Continue
buttons) or externally (via Start/Continue message). External start is only possible if Autostart is set to On (if Autostart is
set to off no external starting is possible).

Clock Source IEC: The SQ16 uses its internal clock if it is started internally (via Start/Stop/Continue buttons). When
started externally the external MIDI clock is used for synchronization. External start is always possible - regardless of
the Autostart setting.

• Clock OUT On/Off

This setting determines if after an internal start of the SQ16 (via Start/Stop/Continue buttons) MIDI clocks are being sent
(Clock out=On) or not (Clock OUT=Off). Regardless of this setting the SQ16 still sends the appropriate MIDI message
for each internal Start/Stop/Continue.

Summary of Contents for SQ16











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands