Malsch bakare IMPULSE, Instruction Manual

Page: 38 / 62

38 |
Adjust GS side rails
Split side rails
1. In standby position, the side rails are located next to the
sleeping surface. In this position, they prevent the mattress
from slipping. (Fig. 1)
2. The side rails are raised by swivelling them upwards. In the
middle position, they prevent the resident from falling out
of bed. When raised at the head end, they also provide
standing and mobility assistance for the resident. (Fig. 2)
3. The upright side rail is released by means of two spring
catches in the side bars below the height adjustment
handrail and positioned at its maximum height. Perform
telescopic adjustments using both hands simultaneously
when moving the rail upwards or downwards to prevent
jamming. (Fig. 3)
Do not force the movement!
4. To lower the telescoping side rail height extension, pro-
ceed the same way as to raise it.
5. To swivel the side rails back to the standby position, press
the indicated latches on the lower side rail bar inwards
simultaneously and initiate the tilting motion. (Fig. 4)
Caution! When raising the side rails and side rail
height extensions, ensure and check that the latch-
es engage securely. Always use both hands to move
this element!
Caution! Activate the low position on the IMPULSE
care bed with undercarriage Edition 400 / 400 LR and
Edition 420 / 420 LR only with retracted side rails!
(Fig. 1)
Fig. 2
Fig. 1
Fig. 3
Fig. 4