Malsch bakare IMPULSE, Instruction Manual

Page: 41 / 62

| 41
Adjust EVGS side rails
Vertically retractable split side rails
with one-handed operation
In standby position, the side rails are located next to the sleeping
surface. In this position, they prevent the mattress from slipping.
1. To raise the side rails, pull them upwards with both hands
until they engage with an audible click. In the middle po-
sition, they prevent the resident from falling out of bed.
When raised at the head end, they also provide standing
and mobility assistance for the resident. (Fig. A, 1.)
2. The side rail extension can be released using the
two spring catches below the handrail for telescop-
ic movement and adjusted to its maximum height.
Pull the rail upwards using both hands simultaneous-
ly (Fig. B, 1. / 2). Take care not to tilt and jam the ele-
ment. Follow these actions in reverse to lower the rail.
Do not force the movement!
3. To lower the side rails, pull the release handle forward with
one hand (Fig. A, 2.) and carefully lower the side rails into
the standby position.
Caution! When raising the side rails and side rail
height extensions, ensure and check that the latch-
es engage securely. Always use both hands to move
this element!
Fig. B
2.
1.
Fig. A
1. 1.
2.