Malsch bakare IMPULSE, Instruction Manual

Page: 34 / 62

34 |
Hand controller locking function
The electrical unit combines state-of-the-art technology and sin-
gle-fault safety.
The locking function is a further safety precaution.
Operating locking function hand controller
HC-146 / HC-147:
The locking function is located on the back of the hand controller
and can be operated by staff with a key switch.
By turning the key
switch to the various switch positions, it is possible to restrict the
hand controller functions. Symbols

p. 19-20.
Operation locking function hand controller
HB-400:
To activate the locking function, place the magnetic chip supplied
in the area marked red. At the same time, press the respective
blocking button (for secondary symbols, see table
 p. 22-20 ).
A red lighted LED in the middle of the row of buttons confi rms
that the function has been locked.
The locked functions are released in the same way. By placing the
magnetic chip and simultaneously pressing the button with the
lock symbol, the function is released again and the respective LED
goes out

p. 22-20 .
Braking and transport
IMPULSE care bed with undercarriage Edition 100
The sleeping surface is in the lowest
position. Enable the castors by pressing
the S8 button on the hand controller
and pressing the castor button at the
same time.
(Enable castors operating buttons)
The IMPULSE Edition 100 model is now in transport mode. Press
the S7 button on the hand controller (height adjustment up) to
retract the castors and position the bed on its feet.
(Retract castors / brake operating buttons)
On the IMPULSE care bed with undercarriage Edi-
tion 100 (only mobile in low position), the S8 but-
ton on the hand controller has a double function.
Caution! Transport mode must only be used whilst
the bed is being moved. After moving the bed, disa-
ble the castors by moving the sleeping surface back
to a raised position.