32
|
Low position / fall prevention
(only with IMPULSE care bed with undercarriage
Edition 400
and
IMPULSE care bed with undercarriage
Edition 400 LR
)
Use the corresponding buttons on the hand controller to adjust
the bed to the low position.
(Low position operating button)
Press the button to lower the bed from the transfer position to
the low position.
The undercarriages
Editions 420 / 420 LR
are adjusted to the low
position by means of the S8 button on the hand controller without
intermediate stop.
Caution! Before pressing the button, be sure that
the lowered split side rails are pushed in (
p.
38
, Fig. 1
) and there are no body parts or any
objects under the bed!
Trendelenburg position
( not with IMPULSE care bed with undercarriage
Edition XL
and
Editions 420 / 420 LR
)
Use the corresponding buttons on the hand controller to adjust
the bed to the Trendelenburg position.
(Trendelenburg position button)
Care beds with HC-146 / HC-147:
The Trendelenburg position is blocked for
safety reasons when the bed is in resident
setting.
Care staff can release the block us-
ing the key switch on the back of the
hand controller (position R2 – FREE).
p. 19 Hand controller symbols
After this, the bed can be moved into the Trendelenburg position
using the S10 button on the hand controller. The incline of the
sleeping surface is listed in the table on
p. 14 Technical data
.
Care beds with HB-400:
The locking function of the Trendelenburg position is activated
with the aid of the magnetic chip supplied (
p. 22, Locked
Function Hand controller HB-400)
. The locked function is released
in the same way.
Summary of Contents for bakare IMPULSE
