LeanTo assembly instructions
Page 1: ...LeanTo assembly instructions ...
Page 2: ...nation and repair 5 Keep the cord away from heated surfaces 6 Do not use outdoors 7 Use only SJT 18 AWG cord 8 Risk of injury Maximum load 75 pounds To reduce the risk of electric shock this furnishing has a polarized plug one blade is wider than the other This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit co...
Page 3: ... center bracket 5 Slide second panel into position making sure dowels are aligned 6 Use ratchet straps as listed in note to close gaps in panel joint 7 Install screws to secure the shroud from top of unit and under unit through the base Tools required 1 Powered driver and phillips bit 2 5 32 Allen wrench preferably with a rounded end this would make it easier to get the top bolts started 3 2 Sets ...
Page 4: ...oid damage make sure all edges and faces are covered with a protective material Tools required 1 Powered driver and phillips bit 2 5 32 Allen wrench preferably with a rounded end this would make it easier to get the top bolts started 3 2 Sets of 20 FT ratchet straps 4 Protective cover material for panel protection thick fabric felt or foam Rear view of unit Install 1 4 20 x 11 2 truss head screw B...
