4
ofs.com
imagine a place®
800.521.5381
Assembly instructions
LeanTo assembly instructions
Shroud Installation (Continued)
1.
Use ratchet straps horizontally around top and bottom of the shroud panels to close
them together before screw installation make sure all dowels align. to avoid damage
make sure all edges and faces are covered with a protective material.
Tools required
1. Powered driver and phillips bit
2. 5/32 Allen wrench (preferably with a
rounded end-this would make it easier
to get the top bolts started)
3. 2 Sets of 20 FT ratchet straps
4. Protective cover material for panel
protection (thick fabric, felt or foam)
Rear view of unit
Install 1/4-20 x 11/2
truss head screw
Bottom view
of unit
Rear view
of unit
Attach bracket
with 1/4-20 flat
head screw
