Malsch bakare IMPULSE, Instruction Manual

Page: 30 / 62

30 |
position and, if possible, relieve some of the load. Pull the release
to disengage the back rest and lower it manually into the end
position.
Model for GS / Model without side rail
Handle at the middle of the bed underneath the side panel.
When operating the mechanical
release, hold the backrest fi rmly in
the current position and, if possi-
ble, relieve some of the load. Pull
the release to disengage the back
rest and lower it manually into the
end position.
Press the S1 button on the hand controller again to reactivate
electrical back rest adjustment.
Caution! Before pressing the lever, ensure that there
are no objects or parts of the body below the back
rest. Manually relieve the weight on the back rest
during adjustment to prevent it falling in an uncon-
trolled manner.
DESCRIPTION OF FUNCTION
Depending on the design and type of care bed, the bed can be
adjusted into various positions by adjusting the back rest, the up-
per leg section, the lower leg section and the height of the bed:
Back rest
Use the corresponding buttons on the hand controller to adjust
the back rest.
(Back rest operating buttons)
When raised, the back rest can be adjusted by 120 mm over its
usual length to the head board or 100 mm with Edt. 420 / 420 LR
(optional). Undercarriage Edition 420 / 420 LR optionally available
with 100 mm mattress compensation of the backrest.
This function (mattress compensation) allows the resident to sit
in a comfortable position while avoiding compression of the but-
tocks area and without compressing or restricting the stomach
or upper body.
Mechanical back rest
release / CPR (option)
Model for VGS
Handle at head end on a level with
the side rails.
When operating the mechanical release,
hold the backrest fi rmly in the current
1 Undercarriage Edition 400 / 400 LR / 100 / XL