Malsch bakare IMPULSE, Instruction Manual

Page: 53 / 62

| 53
Malfunction Possible cause Possible solution
Drives cannot be
operated using the
hand controller
Mains cable is not
plugged in
Plug in the
mains cable
Socket not live Check socket
Cable plug con-
nection not fi rmly
connected
Check plug
connections on the
motor and hand
controller
Hand controller or
drive is faulty
Inform the oper-
ator, specialised
dealer or our
customer service
Functions locked
on the hand
controller
Release the func-
tion on the hand
controller
(

p. 19–20)
Motorised adjust-
ment system is
not functioning
properly
There is an
obstruction in the
adjustment area Check moving
parts and remove
any obstructions
The safe working
load has been
exceeded
Reduce the load
Drives cut out
after a long period
of operation
The adjustment
time or safe
working load has
been exceeded
and the control
unit has reacted to
overheating
Allow the drive
system to cool
down suffi ciently.
Opposite function
activates when
operating the hand
controller buttons
Motor plugs have
been mixed up
Check that the ca-
bles are connected
correctly or inform
your operator,
specialist retailer
or our customer
service
The side rails can
no longer be prop-
erly adjusted
The mechanism is
obstructed or bent
Check all moving
parts and remove
any obstructions
or contact our
customer service
Castors do not
brake or cannot be
rolled
Obstructions have
become trapped in
the castors
Remove obstruc-
tions
The castor system
is faulty
Contact our
customer service
team
TROUBLESHOOTING