24
SETTINGS AND TEMPERATURE CHANGES
The temperature can be changed at any time after choosing a cooking function by
simply pressing the 4 key
.
On the display, the temperature and corresponding flash
.
Use the 4 and 5 keys
to set the desired temperature and confirm with the 6 key
.
In any case, after 7 seconds of command inactivity, the temperature chosen
is automatically confirmed (auto-confirm).
You can also access the temperature change using the 2 menu key
.
Set it on the temperature function: the switch is highlighted by the temperature icon
flashing .
To select the desired temperature, use the 4 and 5 keys
and then confirm with the
6 key or after 7 sec it will be auto-confirmed.
PRESET TEMPERATURE
The preset temperature assigned to each function can be changed.
Using the 4 key
(or the 2 menu key ), go to temperature change mode and set the
new preset temperature.
While the display is flashing (and thus within 7 sec), confirm the value by holding
down the 6 key for at least 3 sec. The next time the oven is turned on the new preset
temperature will be active.
OVEN PRE-HEATING
Once the cooking function and temperature has been chosen, the 3 START key
enters cooking mode and the oven starts the pre-heating phase.
The rising temperature icon starts to flash and the status
shows the
temperature reached inside the oven. Once all the bars on the graph are full, a long
audible signal indicates that the set temperature has been reached inside the oven and the
rising temperature icon no longer flashes.
The stabilised temperature icon appears in its .
At this point the oven maintains the set temperature inside the cavity.
If oven temperature changes are made, the rising temperature and falling
temperature icons are activated.
