9
This household appliance is compliant with the provisions of the European
Community Directives
-
LOW VOLTAGE DIRECTIVE – 2006/95/EC
-
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE – 2004/108/EC
The product identification data is stated on the relevant plate applied on the front of the
oven.
The plate must never be removed.
Installation must only be carried out by qualified staff in compliance with the local
regulations in force and following the indications in this manual.
Important: do not lift or pull the oven by the handle.
In case of malfunctioning, disconnect the appliance from the electric mains (do not pull
the power supply cable to disconnect the plug) and contact the authorised original spare
parts technical after-sales centre.
Do not, in any case, attempt to repair the device.
Correct use of the oven
-
The device is only meant to be used by adults. Keep children away.
-
The appliance produces heat both in the functioning phase and due to inertia, even
when just turned off. Do not touch parts inside the oven during these phases and limit
contact with the external parts. Keep children away from the unit when it is in
operation.
The accessible parts may become very hot.
-
To insert or extract containers or accessories from the oven, always wear
suitable protective gloves.
-
Use only containers able to resist to high temperatures
-
Do not leave the appliance unattended during cooking operations that may release
greases or oils that may catch fire.
-
Never cover or lean on the walls or lower part of the oven with sheets of
aluminium or other objects such as pans or trays that could damage the product.
-
Do not use the oven to store objects when it is not in use, otherwise
damage could be caused to both the oven and the objects when the
appliance is switched on.
-
Do not sit on or place weight on the open door and do not hang weights on the
handle as to do so could damage the product and cause malfunctions.
-
Before maintenance or cleaning, unplug the oven and, if
just used, wait for it to cool.
-
Pay attention to the flow of air that leaves the oven when the door is opened
when the same is hot.
-
Do not use jets of steam for cleaning, which could reach and damage
electrical parts.
-
If the supply cord is damage, immediately contact
Technical Assistance which will replace it.
Attention, this appliance must be earthed in compliance with the standards in
force.
For installation of the oven see the “installation instructions” chapter.
