48
REMOVING/MOUNTING THE SLIDING GUIDES (IF ANY)
If any, there are right and left sliding guides, which means they are not interchangeable
on both sides of the oven.
Proceed as follows to remove the sliding element from the lateral guide:
release the lateral guide from the oven together with the sliding element, as reported in
the paragraph above.
Place the guide on a flat surface. Now exert some pressure from top down near the
couplings in the sliding element (fig. 1 step 1). When the couplings underneath come out
from the rod of the lateral guide, the sliding element has been released and can be
removed. (fig. 1 step 2).
fig. 1
To replace the sliding element, position the upper hooks on the special rods of the lateral
guide. Always make sure the sliding element is moving towards the outside of the oven
when it is taken out. Now press the sliding element downwards (fig. 2 step 1) so that it is
coupled onto the lower rods (fig2 step 2).
fig. 2
