Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740
for all your Comdial needs.
Page
4 of 34
NEXT
Next Display
OVER
Override
LCD Screen
Feature
P (followed by last number)
Port
PERS
Personal
PREV
Previous Display
RECALL
Recall
RECON
Reconnect
RING
Ring Tone
S (followed by last number)
Station
SAVE
Save Number
SDIAL
Speed Dial
SEND
Send Transfer
SET
Set
SOHVA
Subdued Off Hook Voice Announce
TIMER
Timer
TKMSG
Take Message
VAB
Voice Announce Block
Rings
Two short rings – intercom call
Single longer ring – outside call
One short ring burst – voice announce
Three short ring bursts – ringback from a hall on hold or in queue.
Choose from six rings to identify calls ringing to your phone.
Program Attendant Features
Creating LCD Response Message
Your phone system provides two default messages, “Back at…” and “Call…”. You
may add eight additional messages or choose not to use the default messages and
create 10 customized messages.
To Store LCD Messages:
1. Write your messages (up to 16 characters) on the chart below.
2. Use the letter code table below to assign a number to each letter
3. Write these numbers on the line beside the message letters
4. Press ITCM
5. Dial “*#05”
6. Dial a message location number (0-9)
7. Dial “#” to clear the current message
8. Compose messages by dialing the two digit codes related to the letters
9. Dial “*” to save
10. Dial the next location number
11. Dial “#” to clear, compose messages with two-digit codes and press “*” to
save
12. Repeat as needed
