Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740
for all your Comdial needs.
Page
16 of 34
Call Waiting
If the extension you are trying to reach is busy, you can send a call waiting tone and
wait for an answer. Press NEXT and then CWAIT and remain on the line. The called
party will hear a short tone burst and may place the original call on hold or hang up.
Autodialing
To automatically dial, press the programmed button. Line selection is usually a part
of the stored autodial. If the stored number is as a second choice at the button,
press HOLD and then the button.
Speed Dial Calling
Station speed dial numbers are exclusive to your phone. System speed dial numbers
are set by the administrator and may be access from every station.
If you manually choose a line for dialing, press HOLD before using a speed dial. If
you place a call on hold before using the speed dial, pause before you press the
speed dial button or the system will automatically choose the line that you have on
hold to place your speed dial call.
To use station speed dials, while on hook dial the keypad number you have
programmed into your phone. To use station speed dials while off-hook and on a
line, press HOLD and the keypad number programmed into your phone.
To use system speed dials while on-hook, press “*” and dial the location number
(01-99) that was programmed into the system. To use system speed dials while off-
hook and on a line, press HOLD and dial “*” and the memory location digits (01-99).
Automatic Redial
When the number you dial is busy or not answering, you can redial it once, initiate a
repeated redialing or save it for later redialing using a programmed saved number
redial button.
To redial the last dialed number one time, press SPKR or hang up to disconnect.
Press “#”. To redial one a minute for 10 minutes, press the ARDL button. When the
tone is heard over the speaker, answer the call. Cancel an automatic redial request,
lift and replace handset or use the phone to make another call.
Select a Line Group
If your system utilizes line groups, access your line group by pressing ITCM and dial
the line group access code 9,81,82 or 83 for groups 1-4. Listen for outside dial tone
and dial the number.
Display Call Time or Cost
If you installer programs your LCD phone to display call costing, press the COST
button to show the cost of the current call. Otherwise, the pressing the TIMER
button will show and display the current call duration.
