Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740
for all your Comdial needs.
Page
26 of 34
To select the system LCD speakerphone
, press DATA. If a call is in progress on
the IST device, it transfers to the LCD speakerphone if it is off-hook or in
speakerphone mode. If the speakerphone is on-hook the call disconnects.
To select the IST device
, press the DATA button. If a call is in progress on the
speakerphone, it transfers to the IST device if that device is off-hook. If the IST
device is on-hook the call is disconnected.
Transfer calls to a distant party’s DIU
by using the normal transfer procedure.
To transfer an active call to your IST device
(to connect a call to the fax
machine, for example), transfer the call to yourself and press the DATA button.
To use a non-proprietary telephone as an IST device,
operate it as a standard
IST, press the button on the LCD speakerphone to select a line, intercom or speed
dial.
Text Messaging
Message Waiting Light
If your station has been assigned as a central message desk or your phone has
message wait ability, you can turn on the message waiting light of any phone to alert
the user that you are holding a message for them.
To turn on message waiting light at a busy station
, press NEXT at the busy
tone, press MSG and hang up.
To turn on message waiting light at a no-answer station
, press MSG and hang
up.
To turn off message waiting
, press ITCM, dial “#3” and dial the extension number
of the station that was alerted and hang up.
If your phone’s message waiting light is flashing
, press ITCM, then HOLD.
Sending LCD Messages
The phone system attendant can program messages for use in displaying your
phone’s status when another user calls your station. Obtain the list from the
attendant (messages 1 and 2 default to “Back At” and “Call”, respectively).
To Turn the LCD Message on:
1. Press ITCM
2. Dial “*02”
3. Dial the code number from the list of messages. When using the “Back At”
message, dial the time in twelve-hour format using the “#” as a colon. When
using the “Call” message, dial the phone number where you can be reached.
4. Press SPKR.
To turn the LCD message off
, press ITCM and dial “#02”.
