Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740
for all your Comdial needs.
Page
15 of 34
Making Calls
Placing Outside Calls
To place an outside call, press the line button or line group button (if prime line is
not assigned to your phone), at the tone dial the number, or press the pre-
programmed button of the number you wish to dial.
Making Intercom Calls
Place an intercom call by dialing the extension number on they keypad or by using a
programmed DSS button. See the “Dial By Name” feature for more information.
When you make an intercom call, either your voice will sound over the receiving
party’s speakerphone or your call will causes the telephone to ring. Default set up
has ringing alert method set up. If the called party sets a voice announce block at
their telephone, all voice announce calls will be prevented.
To cause the called party’s phone to ring, press a programmed DSS button, or pres
ITCM and the extension number.
To place an intercom voice call, press a programmed DSS button and speak, or press
ITCM and dial the extension number.
Executive Override - Breaking in to a busy station or a station in DND
When enabled, you can break in to a conversation at a busy station or a station in
Do Not Disturb.
To break in to a busy station, press NEXT when you hear the busy signal, then press
OVER and join the call in progress. When you press OVER, several short tone bursts
will be heard by all parties.
To break in to a station in Do Not Disturb, press OVER and speak your
announcement unless the ring-back tone sounds, in which case, wait for the party to
respond.
Automatic Callback
If the extension you call in tone announce mode is busy, in Do not Disturb mode or
rings with no answer, use automatic callback to ring your phone when the line is
available. When you reach a station that is busy or does not answer, press CAMP.
When the phone you wish to reach becomes idle, your phone will ring with five short
tones. Press ITCM to cause the other phone to ring. To cancel the callback, press
ITCM and dial “#6”.
If the extension you call in voice announce mode is not answered, press ITCM before
pressing CAMP.
