Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740
for all your Comdial needs.
Page
24 of 34
Ringer Volume
There are four ringer volume levels (ringer off may be installed as well). While your
phone is idle, press VOLUME UP or VOLUME DOWN to adjust.
Speaker Volume
There are eight speaker volume levels. Set them for the current call by pressing
VOLUME UP or VOLUME DOWN to adjust.
Handset Volume
There are either eight or 13 volume levels for handset volume (depending on
whether or not the installer sets the station for a hard of hearing user). To set level
for the current call, while on a call press VOLUME UP or VOLUME DOWN.
Headset Volume
There are 13 volume levels for headset volume. To set level for the current call,
while on a call press VOLUME UP or VOLUME DOWN.
Group Listening Volume
There are eight volume levels for group listening. While on a call, press VOLUME UP
or VOLUME DOWN to adjust.
Default volume settings
for speaker, headset, handset and group listening may be
set by following these steps:
1. Press ITCM
2. Choose speaker, headset, handset or group listen mode to be affected
3. Press VOLUME UP or VOLUME DOWN to adjust
4. Dial “**5” to save the volume setting for future calls.
5. Repeat for each mode.
Setting a Do Not Disturb Condition (when programmed)
Prevent calls from ringing at your station and make your station appear busy to
intercom calls. To use:
1. Press OPTIONS
2. Press NEXT twice
3. Press DND
4. Press ON
5. Press SPKR to end.
To disable
, repeat steps 1-5 above, pressing OFF instead of ON in step four.
Override Toll Restriction
Dial a programmed four-digit TRO code at another station to replace that station’s
toll restrictions, prime line or idle line preference with those of your home station
provided you place a call within 15 seconds. After completing one call, you have 15
seconds to make another call without re-entering the TRO code.
To Use TRO at a Station:
1. Press ITCM
2. Dial “**6”
