MAHA MPJ Series, Original Operating Instructions

Page: 63 / 114

BA550001-en
63
13.6.2 MPJ 2S | MPJ 3S
NOTICE
Information on the oil specification and quantity can be found in the appendix.
To ensure function and reliability, the use of alternative hydraulic oil must be
checked by MAHA.
Tools required
•
Waste oil container 40 l
•
Transparent collecting vessel 5l
•
Allen key A/F 5, A/F 6
•
Bleeding block, see section "Bleeding the hydraulic system MPJ 2S | 3S"
Drain oil
•
Absorb dripping quantities immediately with absorbent rags.
•
Bind larger quantities with oil binding agent.
•
Dispose of rags or saturated binding agent properly.
•
Lift the jack out of the chassis and place it safely on a raised, level surface.
Disassembly in reverse order, as described in the "Installation" chapter.
•
Place the collection container underneath.
•
Remove the screw plugs and sealing rings and drain off the hydraulic oil (A).
•
Seal the screw plugs with new sealing rings.
A