MAHA MPJ Series, Original Operating Instructions

Page: 47 / 114

BA550001-en
47
situation, the lowering valve also opens and the lifting piston moves all the way
down.
10.7.3 MPJ HAE
WARNING
Before pressing the lowering button, ensure that the rotary switch for changing
the lowering speed is set to closed / slow / 0.
The lowering process is initiated by pressing the corresponding pushbutton.
During the lowering process, the lowering speed can be changed using a rotary
potentiometer.
MAHA strongly recommends adhering to the following procedure when
lowering in order to avoid damage to property and personal injury:
•
Set rotary switch to 0
•
Press the lowering button
•
Hold down the button and check the lowering speed using the rotary poten-
tiometer / rotary knob.
10.8 Moving units onto pit jacks
WARNING
Removed units must be secured on the load handling attachment. If the load
cannot be secured by the load handling attachment itself, other measures must
be taken (e.g. lashing straps) to prevent injuries caused by the load falling.
Only move the chassis by the handles and only with both hands!
The pit jacks must be moved smoothly, even when starting and braking.
Secure the unit on the jack and lower it as far as possible. Use appropriate load
handling attachment to secure the load. Then release the chassis brake and
move the pit jack smoothly using the handles. Once the pit jack has reached its
destination, secure it against rolling away by applying the chassis brakes.