MAHA MPJ Series, Original Operating Instructions

Page: 24 / 114

24
BA550001-en
8.2 Assembly of the rail-guided chassis
1 Remove all packaging from the pit jack and chassis.
NOTICE
The chassis is matched to the pit specified in the order. Use in other pits is only
permitted after consultation with MAHA.
2 For occupational safety reasons, the jack must be disconnected from the
chassis during the installation process. To do this, remove all four hexagon
head screws (A). When using the telescopic pit jack, ensure that the cover
of the operating unit is secured.
3 Using suitable lifting gear, lift out the pit jack in an upright position as it sits
in the chassis and set it down on level ground.
4 Secure the freely movable pit jack axles against uncontrolled movement in
the chassis, for example by fixing them to the side panel with cable ties.
5 Lower the chassis into the pit using suitable lifting gear.
6 Set the adjustable side parts of the chassis to the respective pit
dimensions. To do this, loosen the hexagon head screws (B). Make sure
A A