MAHA MPJ Series, Original Operating Instructions

Page: 86 / 114

86
BA550001-en
7 Fit a new set of seals to the cleaned guide bush and piston. To keep the O-
ring in position, we recommend applying multi-purpose grease to the groove
for the O-ring.
NOTICE
In the illustration on the right, a non-return valve can be seen inside the piston,
see large arrow. Check for damage and contamination and replace if necessary.
8 Generously coat the area inside the guide bush with hydraulic oil and push the
guide bush onto the cylinder barrel from below. Then tighten the piston
hand-tight and secure with a grub screw. If present, ensure that the two M8
LFK screws are screwed back into the cylinder base (only required for MPJ
16.5/1200 3S).
7