Magnetek FLEX EX, Instruction Manual

Page: 9 / 120

Page 8
4.12 Program Serial Number (Flex Pro transmitter)
1) Make sure the I-Chip is connected to the programmer.
2) Press “
→ ” button to enter Serial Number setting.
3) Press “ ↑ ” and “ ↓ ” button to change serial number as a whole or…
4) Press “ → ” button to go to the 1
st
digit on the far left of the serial number.
5) Press “ ↑ ” and “ ↓ ” button to change numeric value.
6) Press “ → ” button to go to the next digit to the right and repeat step 5.
7) Press “BACK” button to go back to step 3 or 4.
8) Exit Program Serial Number by pressing the “BACK” button until the cursor
is shown next to “TXSN”.
9) Press “ ↑ ” and “ ↓ ” button to scroll through other Flex EX settings.
4.13 Program Project ID (Flex Pro transmitter)
1) Make sure the I-Chip is connected to the programmer.
2) Press “
→ ” button to enter Project ID setting.
3) Press “ ↑ ” and “ ↓ ” button to change serial number as a whole or…
4) Press “ → ” button to go to the 1
st
digit on the far left of the serial number.
5) Press “ ↑ ” and “ ↓ ” button to change numeric value.
6) Press “ → ” button to go to the next digit to the right and repeat step 5.
7) Press “BACK” button to go back to step 3 or 4.
8) Exit Program Serial Number by pressing the “BACK” button until the cursor
is shown next to “PRJT”.
9) Press “ ↑ ” and “ ↓ ” button to scroll through other Flex EX settings.
4.14 Program CAN ID (Flex Pro transmitter)
1) Make sure the I-Chip is connected to the programmer.
2) Press “
→ ” button to enter CAN ID setting.
3) Press “ ↑ ” and “ ↓ ” button to change serial number as a whole or…
4) Press “ → ” button to go to the 1
st
digit on the far left of the serial number.
5) Press “ ↑ ” and “ ↓ ” button to change numeric value.
6) Press “ → ” button to go to the next digit to the right and repeat step 5.
7) Press “BACK” button to go back to step 3 or 4.
8) Exit Program Serial Number by pressing the “BACK” button until the cursor
is shown next to “CAN”.
9) Press “ ↑ ” and “ ↓ ” button to scroll through other Flex EX settings.