MACROMEDIA CONTRIBUTE-USING CONTRIBUTE, Use Manual

Page: 69 / 214

Working with Text 69
To set list properties for a list item:
1
In your draft, place the insertion point in the bulleted or numbered list item you want to change.
Note: If you select multiple items, the list properties option isn’t available.
2
Do one of the following:
•
Select Format > List > Properties .
•
Right-click, select List , then select Properties .
Note: This option is not available for template-based pages or in tables.
The List Properties dialog box appears.
3
In the Selected item section, change options for the list:
•
Style specifies a style for the selected list item.
Options in the pop-up menu are specific to the list type, either bulleted or numbered.
•
Reset to number sets a specific number from which to number list item entries.
4
Click OK .
Contribute applies your changes to the list item.
Checking spelling
It’s a good idea to use the Check Spelling command to check the spelling in your draft after you
add or edit text.
To check and correct spelling in your draft:
1
Click the Check Spelling button in the toolbar or select Format > Check Spelling .
If Contribute encounters an unrecognized word, the Check Spelling dialog box appears.
2
Select the appropriate option based on how you want Contribute to handle the discrepancy:
•
Click Add to Personal to add the unrecognized word to your personal dictionary. You can add
any word, and Contribute will ignore it in the future.
•
Click Ignore to ignore this instance of the unrecognized word.
•
Click Change to replace this instance of the unrecognized word with text that you type in the
Change to text box or with the selection in the Suggestions list.
•
Click Ignore All to ignore all instances of the unrecognized word.
•
Click Change All to replace all instances of the unrecognized word in the same manner.
3
When you finish checking spelling, click the Close button in the Check Spelling dialog box, or
click OK in the Spelling Check Completed message box.