Page
51
of
63
Three cable ties are required!
–
Re-secure the Wire with cable ties as instructed below:
A1) Insert the cable tie (100mm x 2.5mm) through the top hole in the Chassis plate and along the back of the
red and black wires.
A2) Fold the cable tie around the Black wire and pass the cable tie back through the hole and over the Red wire.
A3) Tie the cable tie retaining the Black wire and Red wire.
A4) Repeat this process for the second and third cable tie. For the bottom hole a cable tie 100mm x
2.5mm can be passed through the hole then around the Black and Red wires and tied off. Finally, snip of the
surplus cable once secured.
Summary of Contents for TX440 Advanced PT
Page 10: ...Page 10 of 63...
Page 11: ...Page 11 of 63...
