Page
40
of
63
Lift Tape
This section will instruct the correct procedure on how to remove and replace the Lift Tape.
Removal
Step 1 - Remove external covers from the Hoist. (refer to section 9.1)
Step 2
–
Remove the PCB from the Hoist. (refer to section 9.2)
Step 3
–
Remove the Battery from the battery brackets. (refer to section (9.3)
Step 4
–
Remove QRS Hook. (Refer to section 9.6)
Step 5
–
Remove Bottom Cover from Hoist. (Refer to section 9.7)
Step 6
–
Remove Lift Motor from Hoist. (Refer to section 9.5)
Step 7
–
Pull the lift tape until it have fully unwound from the Hub.
Step 8 - Using a small slotted screwdriver remove the 8mm E-clip from the Strap pin.
Summary of Contents for TX440 Advanced PT
Page 10: ...Page 10 of 63...
Page 11: ...Page 11 of 63...
