Page
27
of
63
PCB
This section will instruct the correct procedure on how to remove and replace the PCB.
9.2.1
Powered Traverse PCB
This section will instruct the correct procedure on how to remove and replace the Powered
Traverse PCB, this procedure can also be used as guidance when servicing a Manual Traverse
PCB. See section 9.2.2 instructions on removing a Powered Auxiliary Hoist PCB.
Removal
Step 1
–
Remove external covers of the Hoist. (Refer to section 9.1)
Step 2 - Remove the Power supply cable, by pressing down on the latch and then pull
perpendicularly away from the PCB. (Arrowed)
Step 3
–
Remove the remaining connectors in the numerical order labelled below.
1.
Toggle switch
2.
Limit switch
3.
LCD/Display
4.
LED
5.
Traverse Motor
6.
Charging Beak
1
2
3
4
5
6
Summary of Contents for TX440 Advanced PT
Page 10: ...Page 10 of 63...
Page 11: ...Page 11 of 63...
