Page
50
of
63
Step 7
–
Remove the Pin and the Constant Charge Beak can be removed. Ensure not to lose
the spring situated inside the beak.
Refitting / Replacement
Step 7 - Refitting is a reversal of the removal process noting the following point:
A)
While sliding the Constant Charge Beak into its position, ensure to fit the spring into the
hole shown on the top face of the Chassis, with the beak securing it in place. This allows
the beak to move vertically when fitted.
Summary of Contents for TX440 Advanced PT
Page 10: ...Page 10 of 63...
Page 11: ...Page 11 of 63...
