Page
45
of
63
Charging Beak
Within this section it will explain the correct procedure on removing and reinstalling all Charging
Dock variants, Including Track Type 1, 2,3,4,5. See section 1 for guidance on the track type profiles.
9.12.1
Charging Beak
–
Standard (Track Type 1)
Within this section it will explain the correct procedure on removing and reinstalling the
Charging Beak for servicing procedures or replacement.
Removal
Step 1 - Remove external covers off the Hoist. (refer to section 9.1)
Step 2
–
Remove the Battery from the battery brackets. (refer to section (9.3)
Step 3
–
Disconnect the Charging Beak from the PCB.
Step 4
–
Reroute the Wire from under the Battery Bracket.
Step 5
–
Cut all three Cable Tie’s
that secure the wire to the Chassis.
Step 6
–
Using a 2mm Allen Key, Remove the M3x12 Screws and M3 Nyloc Nuts to release
the Charging Beak.
Summary of Contents for TX440 Advanced PT
Page 10: ...Page 10 of 63...
Page 11: ...Page 11 of 63...
