Page
41
of
63
Step 9
–
Slide the Strap Pin from the Chassis out until 85mm of Pin is showing. This will
release the Lift Tape while securing the Hub.
Step 10 - Gently pull the Lift Tape through the Limit Switch Block to release from the Hoist.
Refitting / Replacement
Step 11 - Refitting is a reversal of the removal process noting the following point:
A)
When reinserting the lift tape through the limit switch block make sure that the fold
over lip is facing the Red E-lower Cord, resulting in the arrow label at the other end
also facing the E-lower Cord.
B)
Before inserting the Lift Tape into the Hub, use your thumb to open the loop, this is
to help the strap pin slide through once located in the Hub.
85mm
Summary of Contents for TX440 Advanced PT
Page 10: ...Page 10 of 63...
Page 11: ...Page 11 of 63...
