MacDon R116 Unloading And Assembly Instructions Download Page 43

Page: 43 / 234

214713

Revision A

1022604

Figure 3.62: Pin Support

Install two M20 x 65 bolts (A), hardened washers,
and nuts.

Temporarily install bolts (B) to help align the assembly.

1026195

Figure 3.63: Pin Installation

Rotate pin (A), until hole in pin aligns with holes in
welded collar (B). Insert pin (C) (MD #19958) through
the collar and pin.

Insert cotter pin (D) (MD #18608) and bend over the
legs to secure it.

1022611

Figure 3.64: Cover Assembly

10. Retrieve cover assembly (B) from the shipping location.

11. Remove two bolts (A) from the cover assembly (B).

Retain bolts and cover for installation later.

ASSEMBLING THE DISC MOWER (WITH OR WITHOUT THE DEALER-INSTALLED TRANSPORT)

Summary of Contents for R116











































































































































































































































Search results

Summary of Contents for R116

Reviews:

Related manuals for R116

Brands by name

Popular brands

MacDon R116, Unloading And Assembly Instructions

Search results

Summary of Contents for R116

Reviews:

Related manuals for R116

Brands by name

Popular brands