MacDon R116, Unloading And Assembly Instructions

Page: 102 / 234

214713
94
Revision A
1026350
A
B
C
D
Figure 5.5: Disc Mower Hitch
4. Lower hitch with the jack so that pin (A) engages
drawbar hitch adapter (B).
5. Install clevis pin (C) and secure with lynch pin (D).
1026351
A B
C
D
Figure 5.6: Primary Driveline
6. Position primary driveline (A) onto tractor power take-
off (PTO).
7. Pull back collar (B) on driveline (A), and push driveline
until it locks. Release collar.
8. Route safety chain (C) from disc mower through chain
support (D) on drawbar hitch adapter and around tractor
drawbar support. Lock hook on chain.
IMPORTANT:
If the tractor has a three-point hitch, lift the links as far
as possible to prevent damage to the hitch.
1026352
A
B
Figure 5.7: Hitch Jack
9. Raise jack (A), and remove pin (B).
SETTING UP THE TRACTOR