214713
62
Revision A
1013890
A
B
C
Figure 4.13: Hitch Packing
5.
Cut banding (A) securing wood supports, then
remove supports (B).
6.
Remove the two bolts (C) securing wood support to
hitch pin. Discard bolts.
1012287
A
B
Figure 4.14: Lifting Hitch
7.
Place sling (A) around the hitch frame. Adjust sling
position until hitch is balanced when lifting.
•
R113
: Approximately 270 cm (106 in.) from the edge
of the tractor end of the hitch (B)
•
R116
: Approximately 350 cm (138 in.) from the edge
of the tractor end of the hitch (B)
8.
Raise the hitch approximately 610 mm (24 in.) off
the ground.
1013891
A
B
C
Figure 4.15: Hitch Packing
NOTE:
Pin (C) is heavy; support it appropriately before
removing bolt (A).
9.
Support pin (C), remove bolt (A) and wood block (B)
from top of pin, and then remove pin (C).
Summary of Contents for R116
