MacDon R116, Unloading And Assembly Instructions

Page: 150 / 234

214713
142
Revision A
7.12 Checking Roll Timing
Check roll timing if excessive noise is coming from the conditioner rolls.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator
’
s seat for any reason.
Roll timing is factory-set and should not require adjustment; however, if there is excessive noise coming from the
conditioner rolls, the timing will need to be adjusted. Refer to the disc mower operator
’
s manual.
PERFORMING PREDELIVERY CHECKS