MacDon R116, Unloading And Assembly Instructions

Page: 164 / 234

214713
156
Revision A
8.2 Transporting with a Tractor
If towing endwise with the optional Road Friendly Transport
™
system, refer to 8.6.1 Converting from Field to
Transport Mode (With Road Friendly Transport
™
), page 160 .
1. Before transporting the disc mower with a tractor, ensure the machine is prepared for transport. Refer to 8.1
Preparing Disc Mower for Transport, page 153 .
2. Ensure hitch safety chain is properly connected to the tractor. Provide only enough slack in chain to permit
turning.
1026353
A
B
Figure 8.6: Jack in Storage Position
3. Move jack (A) to storage position on side of hitch, and
secure with pin (B).
NOTE:
If unit is equipped with a two-point hitch, rotate the
stand to the storage position.
4. Ensure the hydraulic hoses are securely stored on
the hitch.
NOTE:
The primary driveline and hydraulic hoses do not need
to be attached to the tractor for towing.
5. Ensure the hitch swing lock-out and the two lift-cylinder
lock-out valves are closed (handle 90 degree to
the hose).
NOTE:
Keep the slow moving vehicle (SMV) sign, reflectors,
and lights clean and visible at rear of disc mower.
6. Ensure tires are properly inflated.
IMPORTANT:
Do NOT exceed 32 km/h (20 mph).
TRANSPORTING THE DISC MOWER