MacDon R116, Unloading And Assembly Instructions

Page: 163 / 234

214713
155
Revision A
1010555
A
Figure 8.4: Hydraulic Connection
6. Connect the hitch swing cylinder hoses (collars with #2)
to the tractor
’
s hydraulic circuit (A). Refer to 5.3.3
Connecting Hydraulics, page 98 .
7. Swing the disc mower completely to the left, then
completely to the right. Repeat three or four times to
charge the hitch swing circuit.
8. Swing the disc mower so that it is centered behind the
tractor.
1023733
A
Figure 8.5: Hitch Swing Lock-Out Valve Shown
in Closed Position
9. Close the hitch swing lock-out valve by turning
handle (A) to the closed position (90 degree angle to
the hose).
10. Ensure tires are properly inflated.
11. Ensure the slow moving vehicle (SMV) sign, reflectors,
and lights are clean and visible at rear of disc mower.
12. Refer to 8.2 Transporting with a Tractor, page 156 for
transport instructions.
TRANSPORTING THE DISC MOWER