MacDon R116, Unloading And Assembly Instructions

Page: 215 / 234

214713
207
Revision A
11.5 Recommended Lubricants
Keep your machine operating at top efficiency by using only clean lubricants and by ensuring the following:
•
Use clean containers to handle all lubricants.
•
Store lubricants in an area protected from dust, moisture, and other contaminants.
IMPORTANT:
Do NOT overfill the cutterbar when adding lubricant. Overfilling could result in overheating and failure of cutterbar
components.
Table 11.1 Recommended Lubricants
Lubricant Specification Description Use Capacities
Grease
SAE
Multipurpose
High temperature
extreme pressure (EP)
performance with 1%
max. Molybdenum
Disulphide (NLGI
Grade 2) lithium base
As required unless
otherwise specified
—
Grease
SAE
Multipurpose
High temperature
extreme pressure (EP)
performance with 10%
max. Molybdenum
Disulphide (NLGI
Grade 2) lithium base
Driveline slip-joints
—
Gear
Lubricant
SAE 80W-90
High thermal and
oxidation stability API
service class GL-5
4.0 m (13 ft.)
Cutterbar 8 liters
(8.5 qts [US])
Gear
Lubricant
SAE 80W-90
High thermal and
oxidation stability API
service class GL-5
4.9 m (16 ft.)
Cutterbar 10 liters
(10.5 qts [US])
Gear
Lubricant
SAE 85W-140
Gear lubricant API
service class GL-5 Conditioner roll timing
gearbox
0.7 liters (0.75 qts [US])
Gear
Lubricant
SAE 85W-140
Gear lubricant API
service class GL-5 Cutterbar-conditioner
drive gearbox
1.8 liters (1.9 qts [US])
Gear
Lubricant
SAE 85W-140
Gear lubricant API
service class GL-5 Hitch (front) swivel
gearbox Upper: 1.2 liters (1.3 qts [US])
Lower: 1.7 liters (1.8 qts [US])
Gear
Lubricant
SAE 85W-140
Gear lubricant API
service class GL-5 Header (rear) swivel
gearbox Upper: 1.2 liters (1.3 qts [US])
Lower: 1.7 liters (1.8 qts [US])
REFERENCE